New Page 1

SI- Series Ultrasonic Micrometer

PDF Version

The hand held SI-Series Ultrasonic Micrometer are affordable precision tools that require no special training to operate.
Simply touch the probe to one side of the material and the SI-Series tell you its thickness or, drag the probe along the surface of the material and the SI-Series will automatically scan the area for the thinnest reading.
The SI-Series are lightweight, rugged tool that are resistant to water and oil. Other features include a backlight LCD and a bar graph to indicate signal strength.
The SI-Series are protected by the longest warranty in the business 5 full years.
The SI-Series can go where you go, to do the work you do, saving you time and money, making fast, accurate measurements



SOME OF THE APPLICATIONS
Cylinder Bores Ported Heads Roll Cages Non-Destructive Testing Corrosion and Pitting	Tube and Pipe Tanks Boiler Tubes Glass Possibilities Unlimited


THE SI SERIES: TECHNOLOGY WITH A PURPOSE
	With the hand held SI-Series Ultrasonic Micrometer, you can make reliable measurements or scan a length of material for the thinnest point. The tool’s backlight display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The SI-Series come complete, ready to use and are protected by Sabern Instruments, Inc. 5 year limited warranty.

SPECIFICATIONS

Made of

Extruded Aluminum Body

Physical:

Weight:

10 Ounces (285 grams) with batteries

Size:

2.5 W x 4.5 H x 1.24D inches

63.5 W x 114.3 H x 31.5D mm

Operating Temperature:

-20 to 120F (-30 to 50 C)

Case:

Made of Extruded Aluminum Body with Nickel-Plated Aluminum and Caps (gasket sealed)

Keypad:
Sealed membrane that is resistant both water and petroleum products. Six tactile-feedback keys.

Transducer:

Dual-element (transmit and receive). 1 to 10 MHz frequency range.

Locking quick disconnect LEMO connectors. 4 foot cable. Custom transducers available for special applications.

Power Source:

Two 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 200 hours on alkaline and 130 hours on NiCad. Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.

Display:

Multi-function 4.5 digit liquid crystal display with 0.500inch numerals, backlight for use in poor light conditions.

Backlight is selectable on/off /auto (illuminates only when taking a measurement).

Measurements displayed in inches,inches/microsecond,millimeters,and meters/second.

Bar graph indicates stability of reading.

Warranty:

5 year limited.

Measuring:

Range:

Measure from 0.025 to 19.999 inches

(0.63 to 500 millimeters)

switch to select English or metric units.

Resolution:

0.001 inch (0.01 millimeter)

Velocity Range:

0.0492 to 0.3937in/µs.

1250 to 10000 meters/second

Built-in:

0.250 inch (6.35 millimeter)

reference for probe zeroing.

Four readings per second for single point measurements or

16 per second in Scan Mode captures the minimum

thickness.

Single and two point

calibration option included.

Certificate of calibration:

Factory calibration traceable

to national standards.

Packing:

The SI-Series are supplied

with Gage, Standard

Transducer, Couplant,

Manual Instruction,

Foam-fitted hard plastic

carrying case, Certificate of Calibration and 2 AA alkaline batteries.

Brochure

(SI-Series)

PDF version